Explore Books on
axial loads
1-24 of 43 Books
Automotive control systems
By U Kiencke,Darrell Socie,Gary B. Marquis,Uwe Kiencke,Lars Nielsen
Plate and butt-weld stresses beyond elastic limit, material and structural modeling
Plate and butt-weld stresses beyond elastic limit, material and structural modeling
By V. Verderaime
Buckling of circular cylindrical shells under dynamically applied axial loads
Buckling of circular cylindrical shells under dynamically applied axial loads
By James Douglas Tulk
Stability of circular cylindrical shells under transient axial impulsive loading
Stability of circular cylindrical shells under transient axial impulsive loading
By David Gary Zimcik
Fracture analysis of stiffened panels under biaxial loading with widespread cracking
Fracture analysis of stiffened panels under biaxial loading with widespread cracking
By J. C. Newman
Buckling behavior of long symmetrically laminated plates subjected to shear and linearly varying axial edge loads
Buckling behavior of long symmetrically laminated plates subjected to shear and linearly varying axial edge loads
By Michael P. Nemeth
Effects of stiffening and mechanical load on thermal buckling of stiffened cylindrical shells
Effects of stiffening and mechanical load on thermal buckling of stiffened cylindrical shells
By Theodore F. Johnson
Multiaxial fatigue of an induction hardened shaft
Multiaxial fatigue of an induction hardened shaft
By Kevin Lease
Loads simulation and analysis in automotive engineering
Loads simulation and analysis in automotive engineering
By Society of Automotive Engineers
J-integral estimates for cracks in infinite bodies
J-integral estimates for cracks in infinite bodies
By Norman E. Dowling
Determination of the ultimate capacity of elastomeric bearings under axial loading
Determination of the ultimate capacity of elastomeric bearings under axial loading
By Gregory L. Bradley
Buckling investigation of ring-stiffened cylindrical shells with reinforced openings under unsymmetrical axial loads
Buckling investigation of ring-stiffened cylindrical shells with reinforced openings under unsymmetrical axial loads
By W. Baker
Effect of fiber orientation on initial postbuckling behavior and imperfection sensitivity of composite cylindrical shells
Effect of fiber orientation on initial postbuckling behavior and imperfection sensitivity of composite cylindrical shells
By N. S. Khot
On the influence of initial geometric imperfections on the buckling and postbuckling behavior of fiber-reinforced cylindrical shells under uniform axial compression
On the influence of initial geometric imperfections on the buckling and postbuckling behavior of fiber-reinforced cylindrical shells under uniform axial compression
By N. S. Khot
Analysis of the buckling process of circular cylindrical shells under axial compression
Analysis of the buckling process of circular cylindrical shells under axial compression
By Roderick C. Tennyson
Stress concentration at external notches in members subjected to axial loadings
Stress concentration at external notches in members subjected to axial loadings
By A. T. Derecho
The design of sections for flexure and axial load according to CP110
The design of sections for flexure and axial load according to CP110
By A. W. Beeby
Instrumentation for measurement of axial load in drilled shafts
Instrumentation for measurement of axial load in drilled shafts
By Walter R. Barker
An investigation of stress redistribution caused by creep in a thick-walled circular cylinder subjected to axial and thermal loading
An investigation of stress redistribution caused by creep in a thick-walled circular cylinder subjected to axial and thermal loading
By John Michael Clarke
Design of highly loaded axial-flow fans and compressors
By Arthur J. Wennerstrom
An investigation of stressredistribution caused by creep in a thick-walled circular cylinder subjected to axial and thermal loading
An investigation of stressredistribution caused by creep in a thick-walled circular cylinder subjected to axial and thermal loading
By J. M. Clarke
Determination of yield in Inconel 718 for axial-torsional loading at temperatures up to 649⁰C
Determination of yield in Inconel 718 for axial-torsional loading at temperatures up to 649⁰C
By Christopher M. Gil
General random imperfections in the buckling of axially loaded cylindrical shells
General random imperfections in the buckling of axially loaded cylindrical shells
By J.S Hansen