Explore Books on
crack initiation

Small-crack effects in high-strength aluminum alloys

By J. C. Newman

Penetration of carbon-fabric-reinforced composites by edge cracks during thermal aging

By Kenneth J. Bowles

Progressive fracture of fiber composite build-up structures

By Pascal K. Gotsis

Elastic plastic fracture mechanics methodology for surface cracks

By H. A. Ernst

Simulation of fatigue crack initiation at corrosion pits with EDM notches

By Stephen W. Smith

Isothermal fatigue mechanisms in Ti-based metal matrix composites

By Bhaskar S. Majumdar

Analytical modeling of pressure wall hole size and maximum tip-to-tip crack length for perforating normal and oblique orbital debris impacts

By William P. Schonberg

Progressive fracture of fiber composite thin shell structures under internal pressure and axial loads

By Pascal K. Gotsis

Influence of high cycle thermal loads on thermal fatigue behavior of thick thermal barrier coatings

By Dongming Zhu

Combined effect of matrix cracking and stress-free edge on delamination

By Satish A. Salpekar

Analytical methodology for predicting the onset of widespread fatigue damage in fuselage structure

By Charles E. Harris

High pressure gas permeation and liquid diffusion studies of Coflon and Tefzel thermoplastics

By G. J. Morgan

Fatigue response of notched laminates subjected to tension-compression cyclic loads

By Charles E. Bakis

Prediction of fatigue life of notched specimens under aircraft loading and importance of the relative method in the case of local strain approach

By Buch, Alfred.

Ratio of crack initiation life to total fatigue life and use of local strain approach for prediction of fatigue life

By Buch, Alfred.

The influence of starter notches on flight simulation fatigue crack growth

By R. J. H. Wanhill

On the application of the strain energy density theory in predicting crack initiation and angle of growth

By A. K. Wong

Microstructural and fractographic analysis of fatigue crack propagation in 2024-T351 and 2324-T39

By H. J. Kolkman

Comprehensive structural dynamic analysis of the SSME/AT fuel pump first-stage turbine blade

By A. M. Brown

Characterization of damage progression in SCS-6/Timetal 21S [0]₄ under thermomechanical fatigue loadings

By Michael G. Castelli

Stochastic modeling of crack initiation and short-crack growth under creep and creep-fatigue conditions

By Takayuki Kitamura

Analysis of interface crack branching

By Roberto Ballarini

The role of crack formation in chevron-notched four-point bend specimens

By Anthony M. Calomino

Cyclic creep analysis from elastic finite-element solutions

By A. Ḳaʾufman