Explore Books on
delaminating

Open-mode delamination stress concentrations in horseshoe and elliptic composite curved bars subjected to end forces

By William L. Ko

Analysis of delamination related fracture processes in composites

By Erian A. Armanios

Fatigue life methodology for tapered composite flexbeam laminates

By Gretchen B. Murri

Cross-sectional examination of the damage zone in impacted specimens of carbon/epoxy and carbon/peek composites

By A. T. Nettles

Effects of through-the-thickness stitching on impact and interlaminar fracture properties of textile graphite/epoxy laminates

By Suresh K. Sharma

A final technical report entitled trans-laminar-reinforced (TLR) composites

By Mark Hinders

Strain-energy-release rate analysis of the end-notched flexure specimen using the finite-element method

By Satish A. Salpekar

Instability-related delamination growth of embedded and edge delaminations

By J. D. Whitcomb

Delamination modeling of composites for improved crash analysis

By David C. Fleming

The effect of delamination on the dynamic response of composite laminates as measured by embedded fiber optic Michelson sensor

By Peiliang Gao

Combined effect of matrix cracking and stress-free edge on delamination

By Satish A. Salpekar

Debonding/delamination of composites

By North Atlantic Treaty Organization. Advisory Group for Aerospace Research and Development.

The effect of resin toughness and modulus on compressive failure modes of quasi-isotropic graphite/epoxy laminates

By Mohsen M. Sohi

Separation of crack extension modes in orthotropic delamination models

By Jack L. Beuth

Semi-annual report for NASA grant NAG-1-431

By Barry T. Smith

Observation of intralaminar cracking in the edge crack torsion specimen

By Michael W. Czabaj

Delamination growth in graphite epoxy laminates under compressive loads

By Maria Slomiani

On the effects of delamination damage in fibre composite laminates

By R. Jones

Interlaminar fracture characterization

By Roderick H. Martin

Composite interlaminar shear fracture toughness, G[sub IIc]

By T. Kevin O'Brien

The effects of through the thickness delaminations on curved composite panels

By Blaise A. Horban

Experimental verification of a progressive damage model for composite laminates based on continuum damage mechanics

By Timothy William Coats

Local reconsolidation about rivet holes in APC-2 to reduce delamination under transverse loads

By Donald F. Simmons

Research towards the development of a structurally integrated optical fiber sensor system for impact detection in aircraft composite leading edge

By Stephane Dubois